Main Features

• Plug & play room reservation system

• Standalone reservation panel with intuitive user interface

• Side located green/red room status indicators

• Compatible with Microsoft 365, Microsoft Exchange, Google Workspace, IceWarp and Zimbra

• No additional hardware and software needed

• Room status indication, room reservation, meeting extend and finish, and many other functions available from the panel

• 7” active color LED illumination display

• Projected capacitive touch overlay

• Built-in light and proximity sensors

• Single cable Ethernet connection with PoE

• 802.1X authentication mechanism supports power-saving

• Proxy Server support

• Advanced power-saving features to reduce energy consumption

• Slim aluminum unibody enclosure, edge-to-edge front glass

• On-wall installation, suitable for glass walls

The touchONE-7-M is a wired on-wall reservation panel offering a clean modern design with edge-to-edge front glass and a sleek aluminum body. It is an ideal reservation panel for any meeting place such as a meeting room, boardroom, training room, auditorium, etc. The panel is delivered with a dedicated reservation application and it works as a direct client for calendar systems Microsoft 365, Microsoft Exchange, or Google Workspace. Any other hardware or software is not needed. The Reservation panel shows the current status of the room as well as the calendar of events.

It allows to reserve the room, and prolong and cancel the current event. Many other functions are available. A single cable Ethernet connection provides easy network integration. The touch panel is equipped with Power over Ethernet (PoE) technology enabling an Ethernet network cable to deliver both data and power. The touch panel installs easily on a glass wall or other flat surface without any wall drilling or surface cutting. When installed it protrudes only 23 mm from the mounting surface.

Touch-screen display

• Color a-Si TFT LCD with LED backlight

• Size 7” / 177.8 mm diagonal, wide screen

• Resolution 1 280 x 800 pixels

• Display colors 32-bit (True Color)

• Transparency 8-bit Alpha blending

• White luminance 400 cd/m²

• Response time 20 ms

• Contrast ratio 800 : 1

• Pixel pitch 0.116 x 0.116 mm

• Pixel density 216 ppi

• Viewing angle ±80° horizontal, ±80° vertical

• Projected capacitive touch overlay

• Edge-to-edge front glass

Indicators

• Left and right side located LED indicators

• Green/red indication for free/occupied room

• Iindication synchronized with display user interface

Built-in sensors

• Light sensor for automatic backlight dimming

• Proximity sensor for automatic backlight switching on

Buttons

• Reset

Firmware

• Dedicated room reservation application

• Admin Web for setup

Power supply

• Power over Ethernet (PoE), 802.3af / Class 0 compatible

• Power consumption

  • 1.8 W - screen saver mode

  • 3.8 W - default brightness 70%

  • 5.2 W - brightness 100%

• PoE Adapter can be ordered separately (product code CS0327)

Physical

• Sleek aluminum body, plastic wall adapter

• Multisurface, e.g. glass wall installation

• Compatible with VESA standard 75 mm x 75 mm

• Protection IP30

• Dimensions 199 x 120 x 23 mm / 7.8” x 4.7” x 0.9” when installed

• Weight 0.8 kg / 1.8 lb

Environment conditions

• Operating temperature 10° to 40° C

• Storage temperature 0° to 60° C

• Relative humidity 10% to 90% non-condensing

Installation using adhesive foil is typically used for a glass wall. Delivered adhesive foil is installed on the wall and then the touch panel is attached by adhesive tape installed on the rear side of the back cover.

Installation using screws can be used for wooden walls, and furniture as well as for holders compatible with VESA standard 75 mm x 75 mm. Four holes are prepared on the rear side of the back cover.